Search Results for: 8x4

** Mod version 1.1 Update:
– Hot fix for New MAN Euro 6 game crash. From now on this mod only supports 4×2, 6×4 and 8×4 for New MAN Euro6. When you buy New MAN E6, do not buy with 6×2, 6×2/4 or any 6×2 based.
– Reduces the maximum cabin roll angle (as suggested by a real life truck driver).
– Differentiates between older and newer truck models by increasing front suspension softness of newer models by 25% (as suggested by a real life truck driver).
Trucks considered to be in the newer model group are:
New Man E6, New Gen Scania, Volvo 2012, DAF E6, Highway, Actros 2014
You will find these newer models to be a little bit softer than older models in some situations. This brings the game to another level of realism.
——————————————————————
This is the full version of Physic’s 7 Mini. The difference between the 2 versions is:

Physics 7 Mini:
– Cabin weight 650 kg (same as vanilla)
– Builtin Air Ride B

Physics 7 Full:
– Cabin weight 1,000 kg. The 1 ton cabin of the full version makes the cabin movement more obvious and complete.
– Built in its own unique air seat. (never published before)
– Less max cabin roll angle (since v1.1 (as suggested by a real life truck driver))
– Newer truck models are softer than older truck models (since v1.1 (as suggested by a real life truck driver))
The newer models are: New MAN E6, DAFF E6, Highway, New Gen Scania, Actros 2014, Volvo 2012

This mod has been tested and approved by real life truck drivers to be very close, accurately simulating real life trucks.

PLEASE KEEP IN MIND THAT:

1. This mod aims to be natural, realistic and close to real life truck as much as possible.

2. No mods can fix the SCS’ road surface too smooth problem. When you drive with this mod you have to keep in mind that SCS’ roads are unrealistically smooth. So there is no way that your truck will bounce all the time like on real life roads. Most other physics mods make your truck shake too freaky and insane. This mod makes sure that your truck responds naturally and realistically to each bump, corner SCS offers.

3. All 8×4 models are intentionally made harder suspension to prevent the nose dipping too low.

4. This mod works best with the default value of “g_suspension_stiffness” and “g_truck_stability” if you have adjusted those values before, please make sure you reset them to default before you play with this mod.

VIDEO SHOWCASE:
(I am not the maker of this video)
youtube.com/watch?v=JvYqA4x3Nto

BENCHMARK VIDEO
This mod is made based on this video. Try this mod and compare the feeling with this video. You will find that it is very close.
youtube.com/watch?v=S8ag0pV5RzM

COMPATIBILITY

– Patch 1.34 and 1.33
– All SCS trucks including the new MAN Euro 6 (only 4×2, 6×4 and 8×4 for the new MAN)
– This mod includes its own unique air seat. You don’t need to use my Air Ride mods. But if you don’t like the included seat, you can use any of my Air Ride mods with this mod by placing the Air Ride mod higher. My Air Ride mod will replace the seat automatically.

KNOWN ISSUE:

For the SCS new MAN Euro 6, this mod only supports 4×2, 6×4 and 8×4 to prevent game crash.
So if you buy the new MAN Euro 6, do not buy with 6×2 or 6×2/4.

MODDED TRUCKS?

I am not going to add modded trucks, but I tell you how to add by yourself:

1. Make sure your modded truck is the latest version and compatible with 1.34
2. Find and open your modded truck’s folders named ” def > vehicle > truck > (truck name such as scania RJL)”
3. Delete all folders inside the (truck name) folder except the “chassis” folder.
4. Copy the (truck name) folder, together with the chassis folder inside it.
5. Find my mod folder in your Steam directory, and paste in my mod folder at the same path. (def > vehicle > truck > (paste it here).
6. Open the chassis folder that you have just pasted it. You should see files names 4×2, 6×2, 6×4 etc. You need to open each of them with Notepad or Wordpad and find the line “residual travel” (there should be 2 or 3 of it per file), then change the value number next to “residual travel” to match the value in my mod (open the other trucks to see my value).
7. Save every file you changed.
8. Done. Test it in the game. (my mod must be higher than your truck mods).

** Do the steps with a copy of your truck mod, do not do the steps with your original truck mod. **
** In case your mod is in a zipped or compressed file, you need 7-Zip software to open. **

HOW TO HELP ME ?

1. Send me your Steam Trading Cards or any Steam tradable item.
1.1 Add me to your friend list. (My profile name is “Momo & Yuna” make sure you add the right person)
1.2 Go to my profile page.
1.3 Click the button “More” next to “Send a Message”.
1.4 Choose “Offer a Trade” from the drop down menu.
1.5 Move your Trading Cards to my inventory.

2. Paypal
https://www.paypal.me/aaticha

CAN YOU STEAL MY MODS ?

Yes, but please give me some credits. You could either learn from my mods to produce your own, or just post them as they are. Either way, please give me some credits for my hard work. That way you will look good like a gentleman.

MY EXTERNAL MODS

https://ets2.lt/en/?s=momo

HOW TO CONTACT MOMO ? :

1. The comment section below.
2. Facebook fanpage: https://www.facebook.com/Momos-mods-365686307191461/
3. My Youtube Chanel: https://www.youtube.com/channel/UCEAtYWr0IodkLyO9W4tMbpg/videos?view_as=subscriber
4. My email: [email protected]

Credits:
Momo

DOWNLOAD 112 KB

In real life, trucks do not rock heavily like a boat. But they are not as solid as a rock either. So a good realistic physics mod has to give you the right behavior of a truck suspension, not too shaky and not too steady. I believe this mod is very true to real life. The rest is up to the in-game road surfaces, which unfortunately are smoother than glass.

WHY MINI ?

Since the game patch 1.33, SCS has implemented a whole new physics base. It is a big improvement on truck physics and players can feel the difference clearly, especially when using the console command “g_truck_stability 0” and “g_suspension_stiffness 0”. SCS has taken the truck physics closer to real life.

As a result, physics modders have less work to do with the physics, because the new vanilla phyiscs is now right (or almost) in most parts, leaving very little room for modders to improve.

But i am so glad. Because as a lazy modder, i always dream of the day that SCS’ physics is perfect out of the box, that i can just go straight to play without having to lose a lot of my time modding the game.

WHAT CHANGE ?

This mod is very light, it only tweaks a few things so that you don’t have to worry about the console commands anymore. It keeps everything that SCS has done well, and it changes just a few things necessary.

– Soften the front suspension by about 50%.
– Soften the sway bar by about 80%
– Built in Air Ride B. (Any other Air Ride of your choice will overwrite this if placed higher)
* 8×4 remains vanilla to prevent hitting the ground.
* This mod deals with the “sway bar” (anti-roll) bar directly, not the center of gravity of the truck like “g_truck_stability” command. If you reduce g_truck_stability by yourself you risk your truck to flip.

That’s it, nothing else changed. This mod is ideal for people who do not want to change the game much. (I don’t make a video for this mod because not much changed).

COMPATIBLE WITH

– Patch 1.34 and 1.33
– All SCS trucks of ETS2 (The new MAN is also included).
– All my Air Ride mods (The Air Ride mods must be higher)

Highly recommended to use the default value of “g_truck_stability” and “g_suspension_stiffness”.

MODDED TRUCK COMPATIBILITY

Sorry, i am a lazy modder. You need to add your modded truck to my mod’s folder by:

1. Make sure your modded truck is the latest version and compatible with 1.33.
2. Find and open your modded truck’s folders named ” def > vehicle > truck > (truck name such as scania RJL)”
3. Delete all folders inside the (truck name) folder except the “chassis” folder.
4. Copy the (truck name) folder, together with the chassis folder inside it.
5. Find my mod folder, and paste in my mod folder at the same path. (def > vehicle > truck > (paste it here).
6. Open the chassis folder that you have just pasted it. You should see files names 4×2, 6×2, 6×4 etc. You need to open each of them with Notepad or Wordpad and find the line “residual travel” (there should be 2 or 3 of it per file), then change the value number next to “residual travel” to match the value in my mod (open the other trucks to see my value).
7. Save every file you changed.
8. Done. Test it in the game. (my mod must be higher than your truck mods).

** Do the steps with a copy of your truck mod, do not do the steps with your original truck mod. **
** In case your mod is in a zipped or compressed file, you need 7-Zip software to open. **

TIPS FOR REALISM (not required)

For sound realism
– “s_interior_volume 0.5” (Because modern trucks’ cabins are quiet.)
– “s_wheel_noise 0.5” (Reduce the arcade tire sound)
– “s_air_noise 3” (Feel the wind hitting your windshield)

MY EXTERNAL MODS

https://ets2.lt/en/?s=momo
——————————————————————————————————
USER AGREEMENT

Although all the intellectual property rights belong to SCS, But please respect hard works of the mod author.
The mod author does not give consent for anyone to:

– Re-post by any other download link other than the given link above.
– Re-post as is, as your own.
—————————————————————————————————–
DONATION (Not required, but highly appreciated)

1. Any Steam trading cards are welcome.
2. Paypal account as below:
https://www.paypal.me/aaticha
——————————————————————————————————-
HOW TO CONTACT MOMO ? :

Unfortunately friends invitations will be accepted on certain circumstances only. However, you can contact me through:

1. The comment section below. (Rude comments will be deleted)
2. Facebook fanpage: https://www.facebook.com/Momos-mods-365686307191461/
3. My Youtube Chanel: https://www.youtube.com/channel/UCEAtYWr0IodkLyO9W4tMbpg/videos?view_as=subscriber
4. My email: [email protected]

Credits:
Momo

DOWNLOAD 126 KB