Scania 770S Engine + Badges

3 thoughts on “Scania 770S Engine + Badges”

1. 

   Captain_Black

   4 years ago

   Strange engine. 770 horses, and the torque is 3183. The native has 730 horses and the torque is 3500.

   Reply
2. 

   licinio

   4 years ago

   Engine description
   DC16 385A. 566 kW

   Engine speed 2,000 rpm
   Emission compliance EU Stage V
   Rating IFN
   No of cylinders 90° V8
   Working principle 4-stroke
   Displacement 16.4 litres
   Weight 1,340 kg (excluding oil and coolant)
   Oil capacity 40-48 litres (standard oil sump)
   Electrical system 1-pole 24 V

   Technical data
   Engine speed (rpm)
   1,200 1,500 1,800 2,000
   Gross power (kW) 345 500 566 566
   Gross power (hp, metric) 469 680 770 770
   Gross torque (Nm) 2,745 3,183 3,003 2,702
   Fuel consumption at full load (g/kWh) 191 194 204 210
   Reductant consumption at full load (g/kWh) 19 18 16 19
   Heat rejection to coolant (kW) 134 165 198 212

   DC16 086A. 566 kW (770 hp)
   Fuel optimized
   Edition 04 © Scania CV
   AB, SE-151 87 Södertälje, Sweden
   Engine description
   No of cylinders 90º V8
   Working principle 4-stroke
   Firing order 1 – 5 – 4 – 2 – 6 – 3 – 7 – 8
   Displacement 16.4 litres
   Bore x stroke 130 x 154 mm
   Compression ratio 16.7:1
   Weight 1375 kg (excl oil and coolant)
   Piston speed at 1500 rpm 7.7 m/s
   Piston speed at 1800 rpm 9.24 m/s
   Camshaft High position alloy steel
   Pistons Steel pistons
   Connection rods I-section press forgings of alloy steel
   Crankshaft Alloy steel with hardened
   and polished bearing surfaces
   Oil capacity 35-45 dm3
   Electrical system 1-pole 24V

   Reply
3. 

   licinio

   4 years ago

   .
   This specification may be revised without notice.
   Engine speed (rpm)
   Rating 1200 1500 1800 2100
   Gross power (kW) IFN 345 500 566 566
   Gross power (hp, metric) IFN 469 680 770 770
   Gross torque (Nm) IFN 2745 3183 3003 2574
   Spec fuel consumption. Full load (g/kWh) 192 196 204 217
   Spec fuel consumption. 3/4 load (g/kWh) 193 193 201 217
   Spec fuel consumption. 1/2 load (g/kWh) 197 196 205 226
   Heat rejection to coolant (kW) 169 216 245 269
   IFN – Intermittent service: Rated output available 1 h/6 hours period.
   Unlimited h/year service time at a load factor of 80%.
   Note!
   The fuel consumption values are valid when the engine uses fully warm after treatment system and
   in warm conditions. Fuel efficiency will be reduced during warm up and with colder ambient temperature, ecspecially in combination with un-efficient thermal insulation of after treatment system.

   Reply