Everytime I change the Interior the game crashes for me. Both Sides on the Steering wheel where you have the buttons are invisible, I think there is some kind of collision when I change interior… Hope it gets fixed soon!
Because of huge technical changes, you have to do either METHOD 1 or METHOD 2 to get the new update working correctly.
METHOD 1
1. Remove old V1.5.2.1 from your mod folder.
2. Download and put the V2.0 into your mod folder.
3. Activate it in game mod manager. IT IS HIGHLY RECOMMENDED TO DISABLE ALL ADDITIONAL MODS THAT ARE AFFECTING ON THIS MOD IN ANY WAY, BECAUSE MOST LIKELY THEY ARE NOT COMPATIBLE WITH NEW UPDATE!
4. Load your profile. Your truck may have many missing parts, but that’s normal at this point.
5. Open game console and type g_remove_missing_accessories 1 and press enter.
6. Close the console.
7. Manually load latest autosave.
8. Conversion done. Now go to upgrade shop and customize your truck back to what it was before updating.
OR
METHOD 2
Sell your all owned “Scania R (RJL)” trucks before updating to V2.0.
OR
METHOD 3
Don’t update and use the old V1.5.2.1 instead.
You can also start complaining to the author, if you want to be so childish.
Work perfectly without any crash in 1.25.2 version. Front grill lights working with super logo, Michelin doll at roof bar and other accessories inside outside work perfectly. Great mod
Unfortunately, this needs work. There are parts that don’t appear, others are misplaced, lots of conflict with other mods, etc.
This update made this astonishing mod worse instead of better, but because RJL is proud of his work, i know he will adress these issues soon enough.
Grazie a tutti gli autori:
RJL/Fordsonmies, GT-Mike, 50keda, Sheryo, Anaheim, Mr. Poland, Szeryff123 (a few parts from them), SCS Software (original models), Thunderhawk (equipment tower)
CiaoZ
really and good mod i love it but. I change the Interior the game crashes for me and the mudflap add the the frontside can not sie idk why sorry for my bad engels
Thanks RJL for the update. All is working just fine except for the steering wheel for the 6 series exclusive v8. Then the steering wheel is red (missing textures) but when i choose the uk version everything is just fine
Game crash when I change the Interior&METHOD 1/5
[fs] Failed to open file “/vehicle/truck/scania_rcab_edit/interior/materials/vabis_logo.mat” in the read_only mode
: [material] Can not open ‘/vehicle/truck/scania_rcab_edit/interior/materials/vabis_logo.mat’
: [fs] Failed to open file “/vehicle/truck/scania_rcab_edit/interior/materials/s_wheel_001.mat” in the read_only mode
: [material] Can not open ‘/vehicle/truck/scania_rcab_edit/interior/materials/s_wheel_001.mat’
: [fs] Failed to open file “/vehicle/truck/scania_rcab_edit/interior/materials/s_wheel_002.mat” in the read_only mode
: [material] Can not open ‘/vehicle/truck/scania_rcab_edit/interior/materials/s_wheel_002.mat’
: [fs] Failed to open file “/vehicle/truck/scania_rcab_edit/interior/materials/swheel.mat” in the read_only mode
: [material] Can not open ‘/vehicle/truck/scania_rcab_edit/interior/materials/swheel.mat’
: [fs] Failed to open file “/vehicle/truck/scania_rcab_edit/interior/materials/plastic_dark.mat” in the read_only mode
: [material] Can not open ‘/vehicle/truck/scania_rcab_edit/interior/materials/plastic_dark.mat’
[gl] unable to map attribute (v.tangent)
: [gfx] Failed to create pipeline setup for (/vehicle/truck/upgrade/steering_w/scania_rcab_edit/materials/plastic_dark_v8.mat – fwdopaque)
Any idea when the 1.25 patch will be released for NON-steam users? I AM A RETAIL USER!
Usually it takes a couple of days, but so far 1.25 isn’t in the update section of the ETS2 website.
please HELP!!! or shut i use the online downloader???
I don’t know if this one has a context with this mod, but if I’m in the dealership (scania) I have at position 6 a scania highline only with chassis but without a cabin and when I look into the logfile I found the following:
00:00:56.136 : [chassis_data] Converting obsolete attribute ‘powered_wheel’. Please use attribute ‘powered_axle’ instead (6x4_4.scania.r.chassis).
00:00:56.169 : [chassis_data] Converting obsolete attribute ‘powered_wheel’. Please use attribute ‘powered_axle’ instead (6×2.scania.r.chassis).
00:00:56.170 : [chassis_data] Converting obsolete attribute ‘powered_wheel’. Please use attribute ‘powered_axle’ instead (6×2.scania.streamline.chassis).
00:01:07.420 : [model] Unknown variant name ‘b_cabin’ on model ‘/vehicle/truck/scania_rcab_2009/truck.pmd’
00:01:07.450 : [model] Unknown variant named ‘b_cabin’ in model ‘/vehicle/truck/scania_rcab_2009/truck.pmc’.
00:01:20.611 : [model] Unknown variant name ‘chs_6x2’ on model ‘/vehicle/truck/scania_rcab_2009/truck.pmd’
00:01:20.611 : Redundant rear wheel accessory removed!
00:01:20.611 : Redundant rear rim accessory removed!
00:01:20.611 : Redundant rear rim accessory removed!
00:01:20.611 : Redundant rear rim accessory removed!
00:01:20.630 : [model] Unknown variant named ‘chs_6x2’ in model ‘/vehicle/truck/scania_rcab_2009/truck.pmc’.
And backward by changing truck from position 10 to 9 the game crashes.
My game crashes when I want at RJL what change. If the Scania is the retailer, then the wings are back and outside of the truck.
I downloaded the version 2.0 and then thrown the old version of the mod folder and installs the new.
Can someone help me?
Where is the problem?
Everytime I change the Interior the game crashes for me. Both Sides on the Steering wheel where you have the buttons are invisible, I think there is some kind of collision when I change interior… Hope it gets fixed soon!
The Game Crash.. 🙁
For me aswell… 🙁
@Patrick
IMPORTANT: Before updating to V2.0, read this:
Because of huge technical changes, you have to do either METHOD 1 or METHOD 2 to get the new update working correctly.
METHOD 1
1. Remove old V1.5.2.1 from your mod folder.
2. Download and put the V2.0 into your mod folder.
3. Activate it in game mod manager. IT IS HIGHLY RECOMMENDED TO DISABLE ALL ADDITIONAL MODS THAT ARE AFFECTING ON THIS MOD IN ANY WAY, BECAUSE MOST LIKELY THEY ARE NOT COMPATIBLE WITH NEW UPDATE!
4. Load your profile. Your truck may have many missing parts, but that’s normal at this point.
5. Open game console and type g_remove_missing_accessories 1 and press enter.
6. Close the console.
7. Manually load latest autosave.
8. Conversion done. Now go to upgrade shop and customize your truck back to what it was before updating.
OR
METHOD 2
Sell your all owned “Scania R (RJL)” trucks before updating to V2.0.
OR
METHOD 3
Don’t update and use the old V1.5.2.1 instead.
You can also start complaining to the author, if you want to be so childish.
Yes thank you, it works.
But at the Front Grill i can’t select Ligths.
personne a le meme informatique donc tes methodes ne serve a rien il faut une mise a jour
Where mighty griffin tuning pack DLC ???http://store2.up-00.com/2016-09/1474366066583.jpg
Thanks for the update mate! Good job!
Works prefectly for me. The only problem that I’ve found is I can’t select lights on the front grill.
Cheers
Thank you for the Update, works perfect… 🙂 🙂
Otherwise, same as ACAB, cannot select the Lights on the Front Grill.
Work perfectly without any crash in 1.25.2 version. Front grill lights working with super logo, Michelin doll at roof bar and other accessories inside outside work perfectly. Great mod
Thank you so much! As always perfect!
Test 1.25 Video on my Youtube Channel youtube.com/Rafał PL
youtube.com/watch?v=S9rY9sn3nuo
Way you didnt make the 4 series grill? there are soo many poeple reqeustit it
me i was waithing for 4 series grill =/
Unfortunately, this needs work. There are parts that don’t appear, others are misplaced, lots of conflict with other mods, etc.
This update made this astonishing mod worse instead of better, but because RJL is proud of his work, i know he will adress these issues soon enough.
Well the only thing I noticed is there are no window flags. Nice job as always. Thanks!
can someone this one please make on ats? thanks
Grazie a tutti gli autori:
RJL/Fordsonmies, GT-Mike, 50keda, Sheryo, Anaheim, Mr. Poland, Szeryff123 (a few parts from them), SCS Software (original models), Thunderhawk (equipment tower)
CiaoZ
really and good mod i love it but. I change the Interior the game crashes for me and the mudflap add the the frontside can not sie idk why sorry for my bad engels
Thanks RJL for the update. All is working just fine except for the steering wheel for the 6 series exclusive v8. Then the steering wheel is red (missing textures) but when i choose the uk version everything is just fine
Thanks update!
Game crash when I change the Interior&METHOD 1/5
[fs] Failed to open file “/vehicle/truck/scania_rcab_edit/interior/materials/vabis_logo.mat” in the read_only mode
: [material] Can not open ‘/vehicle/truck/scania_rcab_edit/interior/materials/vabis_logo.mat’
: [fs] Failed to open file “/vehicle/truck/scania_rcab_edit/interior/materials/s_wheel_001.mat” in the read_only mode
: [material] Can not open ‘/vehicle/truck/scania_rcab_edit/interior/materials/s_wheel_001.mat’
: [fs] Failed to open file “/vehicle/truck/scania_rcab_edit/interior/materials/s_wheel_002.mat” in the read_only mode
: [material] Can not open ‘/vehicle/truck/scania_rcab_edit/interior/materials/s_wheel_002.mat’
: [fs] Failed to open file “/vehicle/truck/scania_rcab_edit/interior/materials/swheel.mat” in the read_only mode
: [material] Can not open ‘/vehicle/truck/scania_rcab_edit/interior/materials/swheel.mat’
: [fs] Failed to open file “/vehicle/truck/scania_rcab_edit/interior/materials/plastic_dark.mat” in the read_only mode
: [material] Can not open ‘/vehicle/truck/scania_rcab_edit/interior/materials/plastic_dark.mat’
[gl] unable to map attribute (v.tangent)
: [gfx] Failed to create pipeline setup for (/vehicle/truck/upgrade/steering_w/scania_rcab_edit/materials/plastic_dark_v8.mat – fwdopaque)
my+game+crash+when+i+change+interior+or+change+steering+wheel
i+have+made+the+first+method+
can+u+help+me?
Any idea when the 1.25 patch will be released for NON-steam users? I AM A RETAIL USER!
Usually it takes a couple of days, but so far 1.25 isn’t in the update section of the ETS2 website.
please HELP!!! or shut i use the online downloader???
rework this please is not finish game crach in scania dealer
tres beau camion merci pour ce grand mod
I don’t know if this one has a context with this mod, but if I’m in the dealership (scania) I have at position 6 a scania highline only with chassis but without a cabin and when I look into the logfile I found the following:
00:00:56.136 : [chassis_data] Converting obsolete attribute ‘powered_wheel’. Please use attribute ‘powered_axle’ instead (6x4_4.scania.r.chassis).
00:00:56.169 : [chassis_data] Converting obsolete attribute ‘powered_wheel’. Please use attribute ‘powered_axle’ instead (6×2.scania.r.chassis).
00:00:56.170 : [chassis_data] Converting obsolete attribute ‘powered_wheel’. Please use attribute ‘powered_axle’ instead (6×2.scania.streamline.chassis).
00:01:07.420 : [model] Unknown variant name ‘b_cabin’ on model ‘/vehicle/truck/scania_rcab_2009/truck.pmd’
00:01:07.450 : [model] Unknown variant named ‘b_cabin’ in model ‘/vehicle/truck/scania_rcab_2009/truck.pmc’.
00:01:20.611 : [model] Unknown variant name ‘chs_6x2’ on model ‘/vehicle/truck/scania_rcab_2009/truck.pmd’
00:01:20.611 : Redundant rear wheel accessory removed!
00:01:20.611 : Redundant rear rim accessory removed!
00:01:20.611 : Redundant rear rim accessory removed!
00:01:20.611 : Redundant rear rim accessory removed!
00:01:20.630 : [model] Unknown variant named ‘chs_6x2’ in model ‘/vehicle/truck/scania_rcab_2009/truck.pmc’.
And backward by changing truck from position 10 to 9 the game crashes.
like i said: i don’t know if it has a context
آی کیرم توی این مد.آخه چیه این ساختی مرد حسابی.کص کش این روی ورژن 1.25.1 که میخام فرمونش رو عوض کنم نمیشه که.مادرتو میگام اگه درستش نکنی
porwerkasi’s sideskirt doesn’t work with this mod anyone has a solution?
ok this mod is not compatible with promod
to change the interior of the truck the game crashes
even buying the truck for the first time in the dealership to choose the inside game also locks. Does anyone have a solution?
My game crashes when I want at RJL what change. If the Scania is the retailer, then the wings are back and outside of the truck.
I downloaded the version 2.0 and then thrown the old version of the mod folder and installs the new.
Can someone help me?
Where is the problem?
The sime you brother ? I have promlem no worke all truck scania !!!
For me, everytime game crash, when I try to change interior. I use ProMods Maps, is this compatible? Thank you.
game crash every time .. you going to make it working again for the update 1:26
thanks
HOW TO INSTALL?